Whether you are taking the podium on race day or ripping packs at bandos the Zeez F7 3030 Stach with LED combo set will have you doing it in style.Onboard 128MB flash to store all logs for days of flight.
Zeez F7 Specifications:
- Mounting holes: 30×30
- Up to 8S input (max 36V)
- 5V BEC up to 3A continuous
- STM32F722 MCU (Support BetaFlight, EmuFlight, INav)
- MPU6000 Gyro/ACC for smooth performance
- 128MB Onboard flash
- OSD chip Onboard
- 6 available UART
- VTX switch to control the ON/OFF of the VTX
directly from your transmitter
- LC Filter for 5V VTX
- USB Type C connector
- Onboard RGB LED distribution for clean wiring
to the LED on the arm of the quad.
- Onboard RBG LED
- Notch design on sides and in the front of the – FC
for better fitting on the frame.
- Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.
- Logic Side and USB current protection
Zeez ESC 4in1 60A Specifications:
- Mounting holes: 30×30
- Input: 3S to 6S
- High quality Mosfet: 60A continuous current draw /90A peak current
- Aluminum HeatSink to cooldown the Mosfet.
- BlHeli32 Firmware (support Dshot150/ Dhsot300 /Dshot600/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)
- 8 Pin JST connector and 8 Pin solder pads
- Holes for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)
- Onboard analog current sensor (Firmware Scale: 350)
- ESC telemetry to read RPM and ESC temperature
- Compatible with Bidirectional Dshot out of the box
Zeez RGB LED strip specifications:
- Zeez Led System include 4 strip of RGB led light
- 10 RBG Led on every strip
- Max Current Draw (10 led ON, white color): 0.6A @ 5V
- Painless wiring to Zeez F7 Flight controller and easy control from the Flight controller firmware (such as Betaflight, EmuFlight or INAV)
- Dimension 35mmx7.5mm (the smallest RBG strip for FPV drone on the market)
Zeez 3030 STACK (with LED) includes:
(1X) Zeez F7 Flight Controller
(1X) Zeez 60A 4in1 ESC
(1X) Zeez Led System (4 led Strip)
(8X) Aluminum Standoff
(4X) Aluminum Nut
(1X) ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector
(1X) ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) JST SH 1.00mm connector
(1X) ESC to Flight Controller 8 Pin to Servo Connector JST SH 1.00mm connector
(1X) JST SH 8 Pin Plastic Housing
(1X) JST SH 10 Pin Plastic Housing
(6X) Led Strip to Flight Controller 3 pin JST SH 1.00mm connector
(2X) 470uF 35V Low ESR Capacitor
(1X) XT60 with 12AWG Silicon Cable for battery connection
(2X) 2.00mm Header Pin for VTX connection
(2X) 2.54mm Header Pin for Receiver connection
(4X) Spare M3 rubber anti vibration for Flight Controller or ESC
English version: download here
Shipping & returns Carriers: Full Send FPV uses the United States Postal Service for most shipments, however, we may use other carriers to deliver your order (typically for lipo battery shipments).
UPS Shipping: Note, that UPS does not deliver on Saturdays. We recommend using USPS for all shipments, but UPS is an available option.
Lost Packages: Full Send FPV is not responsible for lost packages. No refunds will be provided if your package is lost in the mail system. It is our recommendation to select the Priority Mail option with the United States Postal Service to ensure that packages are not lost, and that you have at least $50 in insurance. Priority Mail has the most reliable package tracking to ensure packages arrive at their specified destination.
Shipping Time & Delays: Unless otherwise indicated, orders received prior to 4 pm with payment received will usually ship that day, unless it is a holiday or non-business day.
Delivery timeframes provided are estimates and will depend on the carrier. Full Send FPV will not be held responsible for any delays caused by a mail carrier or local postal service.CLICK HERE for the full Shipping.& Returns Policy