NewBeeDrone Hummingbird FC Brushed
Click to enlarge
-14%

NewBeeDrone Hummingbird FC Brushed

$34.99 $29.99

NOTE: This product does not include a receiver module, and requires soldering to install. You can order one with the receiver bundle HERE.

Please follow the instructions on the BeeLink USB Flasher page to update firmware.

The next generation of silverware flight controllers is here, we give you the Hummingbird Flight Controller! The first Silverware FC to include On Screen Display and VTX Control functions.

The Hummingbird FC running our custom tuned Silverware is the ultimate FPV Brushed Angle Racer on the market!

The Hummingbird Flight controller features a built-in VTX with 1mw - 25mw switchable power as well as adjustable On Screen Display functions including changing of the VTX bands and channels. Simply solder on a receiver of your choice in FrSky, DSM, or Crossfire Nano to make your board ready to fly.

Special thanks to Patrick Clarke (Mr. Mockingbird) & Silverware Developers Travis Schrock (NotFastEnuf) & Silver13

Radio Channel Mapping:

The channel mapping is critical for making your Hummingbird fly, some radios will have different mapping (ex: Taranis X9D is A.E.T.R., while Taranis QX7 is T.A.E.R. even though they are both FrSky Protocol) Depending on which Protocol your hummingbird has been flashed with, you will need to change the order on your radio as this is not editable on the hummingbird firmware. See the list below for proper channel mapping:

  • FrSky Radios - A.E.T.R. (Aileron - Elevator - Throttle - Rudder)
  • Spektrum Radios - T.A.E.R. (Throttle - Aileron - Elevator - Rudder)

Crossfire Settings:

  • Receiver RSSI must be set to channel 9 in crossfire lua script on radio/module in order to correctly see OSD RSSI.

Latest Hummingbird Firmware:

All Hummingbird Flight Controller Boards are the same, the only difference is the firmware that comes flashed on them. You can flash any provided protocol hex on your Hummingbird FC regardless of what it was shipped with. When flashing please always do a full erase first and then flash. You can purchase the flashing cable HERE.

 

Specifications: 

  • F031K6 Processor - Silverware Firmware 
  • MPU6050 Gyro
  • 4 x 30A Mosfets (Pulsed)
  • NewBeeDrone OSD (On Screen Display) & VTX Control
  • Built-in VTX 1mw - 25mw switchable power
  • Built-in Barometer 
  • Battery Monitor
  • JST PH-2.0 Nectar Connector Power Lead
  • Programming Port Available
  • Custom tune by Mr.Mockingbird (Team Pilot Patrick Clarke)

Whats Included: 

  • Hummingbird Flight Controller with on-board VTX
  • 5 Mounting Grommets
  • 5 Mounting Screws
  • 5 Motor Wire Rubber Bands
  • Receiver Pin Adapter
  • BeeEye Camera & V2 Canopy 

 



Shipping & returns Carriers: Full Send FPV uses the United States Postal Service for most shipments, however, we may use other carriers to deliver your order (typically for lipo battery shipments).

UPS Shipping: Note, that UPS does not deliver on Saturdays. We recommend using USPS for all shipments, but UPS is an available option.

Lost Packages: Full Send FPV is not responsible for lost packages. No refunds will be provided if your package is lost in the mail system. It is our recommendation to select the Priority Mail option with the United States Postal Service to ensure that packages are not lost, and that you have at least $50 in insurance. Priority Mail has the most reliable package tracking to ensure packages arrive at their specified destination.

Shipping Time & Delays: Unless otherwise indicated, orders received prior to 4 pm with payment received will usually ship that day, unless it is a holiday or non-business day.

Delivery timeframes provided are estimates and will depend on the carrier. Full Send FPV will not be held responsible for any delays caused by a mail carrier or local postal service.

CLICK HERE for the full Shipping.& Returns Policy